|
Save ~ Save ~ Save ~ Save ~ Save ~ Save ~ Save
~ Save ~ Save |
Winegard DS2076 Dish,
0.2dB TechSAT TRACKER, Surge Protector & Inline-Amp
|
|
|
|
Special Of The Week
Buy More, Save
More |
|
Qty |
Price/set |
| 1-4 |
$79.00 |
|
5-9 |
$75.00 |
|
10-14 |
$69.00 |
|
15-19 |
$65.00 |
|
>19 |
$60.00 |
|
 |
|
Excellent choice to
replace your existing satellite dish. Get all the
items below for one super low price!
 Winegard
DS2076 Dish -
76cm / 30 inch offset satellite dish with universal or
tripod type mount.
TechSAT
Tracker LNBF - Standard Ku with super low noise
figure of 0.3dB or lower. The lower the noise figure,
the more stable your signal level.
Surge
Protectors - Protects your crucial components
from lightning. Use it on your receiver or LNBF.
Get one for your receiver, for your switch.
In-Line
Amplifier - Amplify your satellite signal with
the RG6 coaxial surge protector.
$104.47
Save Over $25.00
Only $79.00
|
|
|
|
0.2dB Ku LNB and Surge
Protector
|
|
|
|
Special Of The Week
Buy More, Save
More |
|
Qty |
Price/pc |
| 1-2 |
$27.99 |
|
3 |
$23.33 |
|
4 |
$21.75 |
|
5 |
$19.20 |
|
6 |
$17.50 |
|
|
|
Excellent choice to
replace your existing satellite dish. Get all the
items below for one super low price!
TechSAT
Tracker LNBF - Standard Ku with super low noise
figure of 0.3dB or lower. The lower the noise figure,
the more stable your signal level.
Surge
Protectors - Protects your crucial components
from lightning. Use it on your receiver or LNBF.
Get one for your receiver, for your switch.
$35.49
Save Over $7.00
Only $27.99
|
|
|
|
|
|
|
|
|
SF95 Signal Finder
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-4 |
$11.99 |
|
5-9 |
$10.99 |
|
10-14 |
$9.99 |
|
15-19 |
$8.99 |
|
>19 |
$7.99 |
|
|
|
Use this miniature
meter to easily align your satellite dish. Great
if you are planning to install a
satellite motor.
SF-95
Satellite Signal Meter / Finder
-
SF-95c+
is a satellite finder that helps to make precise dish
set-up easily. Its ultimate sensitivity will indicate
0.2 dB level difference in 950 to 2050MHz.
SF-95c+ is miniature (3.03" x
2.36" x 1.10") and light weight (95 gm)
|
MODEL |
INPUT FREQ |
IMPEDANCE |
MIN. INPUT |
MAX. INPUT
|
POWER |
SIZE |
|
SF-95c |
950-2050
MHz |
70 Ohm |
-40 dB m |
-10 dB m |
13-18 V |
77 x 60 x 28 mm |
|
|
|
|
|
|
|
|
|
RG6 Stripper
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-4 |
$13.99 |
|
5-9 |
$12.49 |
|
10-14 |
$11.49 |
|
15-19 |
$10.49 |
|
>19 |
$9.49 |
|
|
|
Professional RG6/RG59 Coaxial
Stripper Tool.
|
Works excellent with any RG6 or RG59
Coax cable. Preset to 6.4mm. Stripping
length may be adjusted to 4mm, 6mm, 6.4mm, 8mm, and
12mm by unscrewing the 4 Philips screws on the
underside of the stripper and moving the blade back
or forth.
Used by professionals and service
techs for easy stripping of RG6 or RG59 coaxial
cable. Works with Quad shield and standard RG6
& RG59.
Manufactured by: Eagle Aspen.
|
|
|
|
|
|
|
|
|
Compression F Connector
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-4 |
$.75 |
|
5-9 |
$.70 |
|
10-14 |
$.65 |
|
15-49 |
$.55 |
|
>49 |
$.46 |
|
|
|
High Quality Compression "F"
Fittings
|
Excellent high-qualityRG6 "F" type
fitting. To be used with the proper
compression. If you have problems with your
regular "Hex" fittings coming loose, then this is
the solution. The compression holds the
fitting tight against the jacket of the RG6 coaxial
cable. Triple-redundant sealing grooves
eliminate moisture leakage that can cause failures.
Nickel-plated brass avoids health, safety and
environmental consideration of typical cadmium
plating. Two moisture barrier at nut-body
interface provide a gas-tight seal to prohibit
moisture ingress.
Manufacturer Part#: CMP6Q
1 Bag = 50pcs
|
|
|
|
|
F Connector Compression Crimping
Tool |
|
|
|
Compression Crimper
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-4 |
$32.99 |
|
5-9 |
$29.99 |
|
10-14 |
$27.99 |
|
15-19 |
$25.99 |
|
>19 |
$24.50 |
|
|
|
New Compression Crimp
Tool provides simple, fast and reliable
terminations. The perfect solution for CATV, DSS,
Security and Residential structured wiring
installations. Make it even easier with the stripper
tool.
The design of the head makes crimping easier than
other styles.
Works with most any
compression "F" type connectors. Excellent for
professional technicians and installers in the
satellite or cable installation field. Full
1-year warranty on this crimp tool.
|
|
|
|
|
