|
| |
|
Satellite Dish Motor / Rotor
What's a satellite mover? A satellite dish motor, also known as HH (Horizon to
Horizon) Mount is designed to move your satellite dish from "Horizon to
Horizon". When installed properly, based on your latitude,
the motor will follow the satellite arch. The rotor is powered by
the satellite receiver using the same coaxial cable that is hooked up to
the satellite dish and satellite receiver. Using DiSEqC1.2
protocol commands from the receiver,
the motor will turn right or left (east or west). Since this is a
hobby item, technical support is very limited for this item.
Read More.....
|
|
30"/76cm
(75cm, 31 inch 33 inch) dish antenna and FSS
(Linear) LNB / LNBF can pick up the following satellites:
AMC 6
satellite @ 72° W, AMC 9 satellite @ 83° W, AMC 16 satellite @ 85° W,
AMC 3 satellite @ 87° W, Galaxy 28 satellite @ 89° W, Galaxy 26
satellite @ 93° W, Galaxy 3C satellite @ 95° W, Galaxy 25 satellite @
97° W, Galaxy 16 satellite @ 99° W, AMC 4 satellite @ 101° W, AMC 15
satellite @ 105° W, Anik F1R satellite @ 107.3 W, Echostar 9 satellite @
121° W, Galaxy 10R satellite @ 123° W, Galaxy 13 satellite @ 127° W
36" /
90cm antenna and FSS (Linear) LNB / LNBF
can pick up the following satellites:
AMC 6
satellite @ 72° W, AMC 5 satellite @ 79° W, AMC 9 satellite @ 83° W, AMC
16 satellite @ 85° W, AMC 3 satellite @ 87° W, Galaxy 28 satellite @ 89°
W, Galaxy 11 satellite @ 91° W, Galaxy 26 satellite @ 93° W, Galaxy 3C
satellite @ 95° W, Galaxy 25 satellite @ 97° W, Galaxy 16 satellite @
99° W, AMC 4 satellite @ 101° W, AMC 1 satellite @ 103° W, AMC 15
satellite @ 105° W, Anik F1R satellite @ 107.3 W, Echostar 9 satellite @
121° W, Galaxy 10R satellite @ 123° W, Galaxy 13 satellite @ 127° W |
|
|
SG-9120B Motor
|
|
|
SG9120B
Buy More, Save
More |
|
Qty |
Price/pc |
| 1-4 |
$65.00 |
|
5-9 |
CALL |
|
10-14 |
CALL |
|
15-19 |
CALL |
|
>19 |
CALL |
|
 |
|
As you know, the SG6000 DiSEqC motor has
been discontinued. The heavy duty SG9120 is the
newest model DiSEqC motor on the market and comes not
only with a metal
main gear for durability, The B model comes with a
42mm tube to fit the Winegard DS2076 and other popular
antennas on the market and still has metal gear inside
for durablity and dependability.
This new model will fit on the
Winegard & GeosatPro Satellite Dish Antennas!!!
|
-Communication protocol
DiSEqC 1.2/1.3 Level
-Maximum dish diameter 120cm
-Diameter of support pole (35 to 68)mm
-Dish support length 145 mm
-Dish support diameter 42 mm
-Starting movement
consumption (Max.) 350 mA
-Programmable position ( DiSEqC 1.2) 49
satellites |
-Rotation angle 70
-Rotation speed 2.4/s(18V) 1.5/s(13V)
-Operating power supply 13/18 V DC
-Consumption in stand-by mode 40 mA
-Consumption in operating mode 180 mA
-Preset positions (DiSEqC
1.2) 28 satellites
|
Heavy Duty SG9120 With
Metal Gears
|
|
|
|
SG-9120 HH Mount
<<
More Info >>
|
|
|
SG9120
Buy More, Save
More |
|
Qty |
Price/pc |
| 1-4 |
$79.00 |
|
5-9 |
CALL |
|
10-14 |
CALL |
|
15-19 |
CALL |
|
>19 |
CALL |
|
|
|
As you know, the SG6000 DiSEqC motor has
been discontinued. The heavy duty SG9120 is the
newest model DiSEqC motor on the market and comes not
only with a metal
main gear for durability, it comes with a
55mm tube for larger
dishes, already installed.
Please note, this motor will NOT fit on
Winegard DS2076 and most
Fortec Star 80cm and 90cm antennas.
Want to know how many satellites most people
pickup with their motorized antennas?
Read This
|
-Communication protocol
DiSEqC 1.2/1.3 Level
-Maximum dish diameter 120cm
-Diameter of support pole (35 to 68)mm
-Dish support length 145 mm
-Dish support diameter 42 mm
-Starting movement
consumption (Max.) 350 mA
-Programmable position ( DiSEqC 1.2) 49
satellites |
-Rotation angle 70
-Rotation speed 2.4/s(18V) 1.5/s(13V)
-Operating power supply 13/18 V DC
-Consumption in stand-by mode 40 mA
-Consumption in operating mode 180 mA
-Preset positions (DiSEqC
1.2) 28 satellites
|
Heavy Duty SG9120 With
Metal Gears |
|
|
|
|
|
|
|
Most Popular Brand In
Satellite, World Wide
|
Great to use
with any DiSEqC1.2 or USAL supported receiver.
Motor comes with a full 1-year warranty and with
its 42mm mount tube, it will fit the Winegard
DS2076 antenna or the WS7630 antenna perfectly. |
|
|
|
|
|
|
SG-6000 Motor
<<
More Info >>
|
|
|
Sonset SG6000
Buy More, Save
More |
|
Qty |
Price/pc |
| 1-4 |
$69.99 |
|
5-9 |
$65.00 |
|
10-14 |
$60.00 |
|
15-19 |
$56.00 |
|
>19 |
$50.00 |
|
|
|
Extra large mounting bracket makes this
motor one of the most stable and wind resistant motor on
the market. The satellite dish motor can handle a
dish as large as a 120cm | 1.2m.
The SG6000 Dish motor uses
DiSEqC1.2
commands from y our
DiSEqC1.2 satellite
receiver to move it East or West. The
standard 42mm tube allows the motor to work with the
most common and popular dishes on the market.
More Info....
No longer manufactured
Replaced by
SG9120 Motor
Want to know how many satellites most
people pickup with their motorized antennas?
Read This |
|
|
Moteck Digipower
SG2100 Motor |
|
|
|
Great to use
with any DiSEqC1.2 or USAL supported receiver.
Motor comes with a full 1-year warranty and with
its 42mm mount tube, it will fit the Winegard
DS2076 antenna or the WS7630 antenna perfectly. |
|
|
|
|
|
|
|
|
|
|
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-2 |
$45.00 |
|
3 |
$40.00 |
|
4 |
CALL |
|
5 |
CALL |
|
6 |
CALL |
|
|
|
The POWERMAX PMA24 is a top of the line
24 inch actuator arm designed for large C band satellite
dish antennas. Excellent to be used with dishes 8'
in diameter and larger, but not more than 12-feet.
|
Rating
Load@25V |
Maximum
load@25v |
Power
Supply Voltage |
REED
Sensor Currency |
|
440lbs |
795lbs |
DC24-36 |
﹤=10mA |
More Information....
|
|
|
|
|
Powermax VBox-X Satellite
Positioner |
|
|
|
Used to
control C-band actuator arms and mounts |
|
 Compatible
with DiSEqC 1.0 /1.2 Receiver or Any Receiver
Compatible
with any Actuator or H-H Mount
3
Digit LED Display
99
Satellite Positions
Fine-tune
EAST / WEST Buttons
Optional
Remote Control Available |
Includes
a 22 key remote control
Re-synchronize
Function
Auto
turn-off function
Short
circuit and over load protection
Anti-Noise
Design |
|
|
Dish Motor / HH Mount / DiSEqC1.2 Positioner / DiSEqC
Positioner / DiSEqC Motor / Satellite Motor
What is a dish
motor?
A satellite
dish motor or dish motor, also known as an HH mount or DiSEqC motor is the
best way to get signal from multiple satellites and pick up free TV
stations. Using a
DiSEqC1.2
satellite receiver you control the motor to turn east and west.
The dish motor will account for elevation and skew/polarization as well.
HH stands for Horizon to Horizon, meaning the motor will turn your dish
from 1 horizon (east or west) to another horizon. This is also
called an H2H mount.
What type of satellite dish antenna should I use with my
satellite dish mover? You can get away with using a regular
75cm or 76cm dish,
but if you are going to install a motor, our recommendation is to go
ahead with a slightly larger satellite dish.
A 90cm dish or 36" dish antenna will probably suit your need
perfectly. It may cost a little bit too much to ship one of our
90cm dishes, but trust us, you are getting a high quality, commercial
grade satellite antenna with a motor.
Below are just a partial list of satellites that you may
be able to pick up with a HH Satellite Motor:
|
C & Ku Band Satellite Directory &
List for North America By Location |
| Color codes on this regional index: |
No
data/L/S/Ka band |
C band |
C & Ku band |
Ku band |
|
Free TV Channel
Directory & List for North American Satellites By
Language |
Below is our most popular motorized
dishes. Use package#3 below to pick up signal from
both linear and circular Ku band satellites. The
package also comes with 4 coaxial surge protectors to
protect your LNBF, your motor, or your DiSEqC switch
from lightning or power surges. The package comes
with our most popular 76cm dish along with our most
popular satellite dish motor, our top of the line 4x1
DiSEqC switch and offcourse our surge protectors!
|
Package #3 |
|
|
|
Package #3
Buy More, Save
More |
|
Qty |
Price/set |
| 1-4 |
$165.00 |
|
5-9 |
$159.00 |
|
10-14 |
$155.50 |
|
15-19 |
$149.00 |
|
>19 |
$145.50 |
|
|
|
Great for reception of
many satellites. Motor designed to follow the
satellite arch when installed properly and rotate
between different satellites. Works on DSS and FSS
(Linear & Circular) Satellites.
WS7630
Antenna - 76cm / 30inch offset satellite dish
with universal or tripod type mount.
Upgrade
to a Winegard Dish (optional)
Invacom
QPH-031 - Quad Polar LNBF. Works on any
DSS or FSS (Circular or Linear) satellite. Super
low NF of 0.3dB. (Wiring
Diagram)
4X1
WS4120 DiSEqC Switch - Only 4X1 switch on the
market with a full 1-year warranty. Switch between
4 different satellites. (See
Diagram)
Surge
Protectors - Protects your crucial components
from lightning. Use it on your receiver or LNBF.
Get one for your receiver, for your switch.
SG
2100
Motor - Powerful motor controlled by DiSEqC1.2
and USALS commands from the receiver. Does not
require extra wiring. Works with existing coaxial
cable (See
Diagram).
|
|
Below is our most economical motorized
dish package. Pick up signal from any linear Ku
band satellite. Upgrade your LNBF to a dual DSS
circular LNBF for only a few extra dollars. Call
us or email us if you have any questions.
|
Package #4 |
|
|
|
Package #4
Buy More, Save
More |
|
Qty |
Price/set |
| 1-4 |
$119.00 |
|
5-9 |
$115.00 |
|
10-14 |
$109.00 |
|
15-19 |
$105.00 |
|
>19 |
$99.00 |
|
|
|
Great for reception of
many satellites. Motor designed to follow the
satellite arch when installed properly and rotate
between different satellites.
WS7630
Antenna - 76cm / 30inch offset satellite dish
with universal or tripod type mount.
Upgrade
to a Winegard Dish (optional)
TechSAT
Tracker LNBF - Standard Ku with super low noise
figure of 0.3dB or lower. The lower the noise
figure, the more stable your signal level.
SG
2100
Motor - Powerful motor controlled by DiSEqC1.2
and USALS commands from the receiver. Does not
require extra wiring. Works with existing coaxial
cable (See
Diagram).
|
|
|
|
|
View
Cart
