Package #3 - Motorized
FTA Dish Kit
|
|
|
|
Package #3
Buy More, Save
More |
|
Qty |
Price/set |
| 1-4 |
$119.00 |
|
5-9 |
$115.00 |
|
10-14 |
Call |
|
15-19 |
Call |
|
>19 |
Call |
|
 |
|
Great for reception of
many satellites. Motor designed to follow the
satellite arch when installed properly and rotate
between different satellites. Works on DSS and FSS
(Linear & Circular) Satellites.
 Winegard
DS2076 - 76cm / 30inch offset satellite dish
with universal mount.
Want
better reception? Upgrade to a 90cm offset dish
WS
International 521 LNBF - 2 polarity standard
North American LNBF. Works on FSS (Linear) satellite. Super
low NF of 0.3dB.
Latest Satellite Motor / Rotor -
This is the latest DiSEqC motor. Keep in mind that
the SG9120 motors come with metal gear making them a
true heavy duty motor. Don't fall for no name
motors with plastic or nylon gears.
|
|
Motorized
Satellite Dish Package
Want to
know how many satellites most people pickup with their motorized
antennas?
Read This
This package is great for reception of any Ku band satellites.
Package comes with:
This is a great system for reception of almost all Ku band satellites
within N. America. The Ku dish is large enough to obtain signal
from many Ku band satellites. Below is a partial list of
the Ku band Linear / FSS satellites in N. America that you will be able
to pick up with this package:
| Color codes on this regional index: |
No
data/L/S/Ka band |
C band |
C & Ku band |
Ku band |
Pick up signal from low powered and high powered satellites. Want
even more signal quality? Try our
90cm 36 inch satellite dish.
To use this properly, you will need to flip the interior back bracket of
your WS7630 antenna upside down.
Click Here for pictures
Additional Part Recommendations for Easy Installation:
|
Inquire about this package |
|
|
FAQ about Motorized Satellite Systems:
Do I need
to install a separate power line to connect to the
HH motor mount?
No. The
motor gets powered by the receiver. The receiver provides power to
turn the LNB on and to switch polarity. The motor consumes the
same power through the
coaxial cable that runs from the receiver to the
LNBF. Simply run the coaxial cable to your satellite dish motor,
then from the HH dish motor run a 3 or 4 foot coaxial cable to the LNBF.
How do I
control the motor to move it East / West?
The motor is
controlled by the receiver's remote control. All receivers compliant
with the DiSEqC 1.2, 1.3, or USALS protocol have the capability to run
an HH
satellite motor. Once you install and setup the motor to follow the
satellite arch properly and store the different satellite positions and
locations into the receiver, the receiver will automatically go to the
location where the channel is being broadcasted from when you change TV
channels on the receiver.
Are all
HH motors & receivers USALS,
DiSEqC 1.2, & DiSEqC 1.3 compatible?
No.
All satellite motors and HH mounts are DiSEqC1.2 & DiSEqC1.3 compatible,
but not all
dish motors are USALS compatible. Motors that are NOT
USALS compatible are sometimes more reliable.
Not all
satellite C/Ku band receivers are DiSEqC 1.2 and DiSEqC 1.3 compatible.
Some are
DiSEqC1.0. Make sure the receiver
you purchase is at least DiSEqC 1.2 compatible.
Can I
pick up
C band and Ku band?
No.
You need a C band dish (2.4 meters / 6 foot) or larger to be able to
pick up C band. This system is only for Ku band reception.
Does the
motor also adjust for variation in elevation on the dish for each and
every satellite
Yes.
When you install the motor based on your latitude, the motor will adjust
the elevation as well.
Should I
skew (rotate) my
LNBF to align for polarity?
No. Just
leave the LNB at 0 degrees skew and the motor will tilt the satellite
dish to make up for the adjustment of skew.
What is
the benefit from motorizing my dish?
Adding a
motor to your system allows you to receive satellite channels from
multiple satellites & not just one.
|
View
Cart
