Great for reception of 2 different Ku satellites

This package is great for reception of any two Ku band satellites.  Package comes with:

• 2 76cm satellite dish antennas

• 2 linear Ku LNBF's

• 1 4x1 DiSEqC Switch

• 2 Surge Protectors Coaxial RG6 Surge Protectors

About the satellite dish :

This is one of the best and most reliable 76 cm satellite dish on the market.  It's manufactured specifically for WS International Global Satellite Distributor.  WS International is the most reputable dish manufacturing company universally. 

Excellent construction and easy installation dish for any Ku band satellite.  Higher Ku band signal gain than the competition.  Comes with a standard easy fit pole mount and wind brace to ensure excellent mounting.  The elevation scale is one of the best.  Easy to read, and very accurate.   The 76cm dish comes with a 40mm LNB clamp and works with Galaxy25 (Telstar 5 / Intelsat America's 5) satellites for International programming including Farsi, Iranian, Persian, Arabic, Vietnamese, Thai, Chinese, Korean, Portuguese, Nigerian, African, and many more TV stations broadcasting from any Ku band satellite. 

Works well for DISH Network*, DirecTV*, FTA, or any other Ku band satellite.  Excellent for analog, digital and high definition for DISH or DirecTV specially in fringe areas.  *Please note, to use with DISH Network 61.5, 110, 119, 148, 129 or DirecTV, you must purchase a DSS Circular LNB in place of the Linear FSS LNB that comes with the package.  Make sure you choose to upgrade your LNBF to DSS LNBF above.

Since this is constructed with 100% top-end steel, the universal mount is very sturdy & includes wind braces for added security.

About the Linear (Standard / Normal) Ku band LNBF :

The TechSAT TRACKER is one of the better LNBF's on the market, specifically due to the low NF (Noise Figure).  The lower the NF, the better quality signal and higher signal level you receive.  It's excellent for fringe areas.  The LNB is a single and comes in the form of N. American Standard with easy installation and LO (Local Oscillator) frequency of 10750MHz or 10.75GHz. 

• Linear Ku band LNB will work with:

• AMC 6 satellite @ 72° W

• AMC 9 satellite @ 83° W

• AMC 16 satellite @ 85° W

• AMC 3 satellite @ 87° W

• Galaxy 28 satellite @ 89° W

• Galaxy 26 satellite @ 93° W

• Galaxy 3C satellite @ 95° W

• Galaxy 25 satellite @ 97° W

• Galaxy 16 satellite @ 99° W

• AMC 4 satellite @ 101° W

• AMC 15 satellite @ 105° W

• Anik F1R satellite @ 107.3 W

• Echostar 9 satellite @ 121° W

• Galaxy 10R satellite @ 123° W

• Galaxy 13 satellite @ 127° W

• See More satellites Here.....

Please note, due to the rapid technology change in the satellite industry, we may not always have the TechSAT TRACKER in stock.  In case we don't we will replace it with another comparable LNBF of our choice.

About the 4x1 DiSEqC Switch

A DiSEqC switch takes signals from many LNB's and combine them to be used by a receiver.  The DiSEqC protocol is usually used by Free To Air or "standard" satellite receivers.  All Common Interface (CI) Receivers, most Common Access (CA) receivers and and all Free To Air (FTA) use DiSEqC protocol. 

Here is a tip on giving your DiSEqC switch a long life.  DiSEqC switches usually last a long time if you treat them right.  Always make sure you unplug your satellite receiver from the electrical outlet BEFORE you change the switch or change ports on the switch.  Doing so each time will ensure your switch will work flawlessly and keeps you from having to purchase many switches. 

Additional Part Recommendations for Easy Installation:

• Waterlocks

• SF-95 Signal Finder

• Satellite Installation Kit

• Diplexers

• Cable Clips (10pc bags)

• In-Line Coaxial Amplifier

 

Looking for Satellite Switches?

Looking for Ku band LNB ? Click Here

Looking for Dish Motor ?

Terms and Conditions

We are located about 17 miles N. of the city of Atlanta