FTA TV Channels

Supreme Master TV
Free Coptic TV

Free Arabic TV
Free Afghani TV

Free African TV
Free Chinese TV
Free Christian TV
Free Farsi TV
Free Fashion TV
Free Hungarian TV
Free Iranian TV

Free Israeli Radio
Free Italian TV
Free Korean TV
Free Kurdish TV

Free Russian TV
Free Nigerian TV
Free Portuguese TV
Free Persian TV
Free Russian TV

Senegalaise TV
Free Spanish TV
Free Thai TV
Free Turkish TV

Free Vietnamese TV
Свободно Русский


ماهواره ایرانی

Fixed Dish

FTA Systems

Motorized Dish

FTA Systems

Large FTA Ku

Band Offset Dishes

FTA Motorized

Dishes for Ku

Band Satellite

Motorized Dishes

for RVs

Digital & FTA


Dish & LNB

Kit New

FTA & Ku


BUD C band


Multiple Satellite


FTA Dish

Motors New

FTA Satellite


FTA Installation

Equipment & Tools

Fortec Star HH42 Satellite Dish Motor | Ku Band Actuator DiSEqC Motor

DiSEqC Motor Mount


DiSEqC Motor


Have a WS9036 dish or another 90-120cm dish?


Try our new SG9120 HH Motor


DiSEqC Motor DiSEqC Motor Label Bottom view of the DiSEqC Motor


Satellite Motor Wiring Diagram & Instructions


Fortec Star DiSEqC Motor

DiSEqC Motor | HH SG2100 - Motor Mount | SG6000

Information Request

HH42 DiSEqC Motor

Buy More, Save More













Great to use with any DiSEqC1.2 or USAL supported receiver.  Motor comes with a full 1-year warranty and with its 42mm mount tube, it will fit the Winegard DS2076 antenna or the WS7630 antenna perfectly.


Great Deal On Accessories When You Make A Purchase!  Choose below






Surge Protector

Add Now

In-Line Amp

Add Now

Installation Kit

Add Now


Add Now


  • Easy to install.

  • Move the Dish automatically when a channel is selected

  • Compatible with all Fortec Star satellite receivers.


Model HH42

Antenna Diameter

1.2 Max.

Diameter of Tube


Azimuth Angle

75 East~75 West

Elevation Angle

10 ~75

Input/Out put Voltage
13/18V DC
Power Consumption
50mA (Standby Mode)
350mA (Max.)
Rotation Speed
1.9 /sec.(at 13V); 2.5 /sec.(at 18V).
Satellite Positions
F Type
Command Protocol
DiSEqC 1.2
Resynchronize Function
Goto Position 0 Fuction
Goto X Function
Positioning Sensor
High Resolution Hall Effect Sensor
East/West Limit
Adjustable Hardware and Programmable Software
Manual Button

Includes a FREE 42mm tube to fit the most popular dish on the market, the Winegard

DS-2076 76cm satellite dish!


Installation Tips & Help

  • Always install your motor based on your latitude to ensure precise & proper installation.  Use the latitude meter on a motor. 

SG-2100 Motor Latitude Meter | Elevation & Lattitude Meter

  • Always figure out your most southern satellite based on your longitude and use that satellite as a guide to the initial setup of your motor.

What is my Longitude and Latitude? | Find Your Logitude & Latitude Here

  • Use a SF95 signal meter to ensure your motor follows the satellite arc.

SF95 Satellite Finder | Satellite Meter Wholesale Satellite Distributor


Frequently Asked Questions & Tips & Tricks


How many receivers can control a DiSEqC motor?

Since a DiSEqC1.2 motor is designed as a hobby item, only one FTA free to air receiver can control the positioning movement of the motor. However, if you use a dual LNB or quad LNB you can install multiple receivers, but each receiver can only watch the programming broadcasted from that particular satellite.

Do I have to be watching the same thing on all receivers if I use a dual LNB or quad LNB?

No. You don't have to watch the same programming, but you do have to watch a channel that is broadcasting from that particular satellite that your motor is pointing to. Keep in mind that only your main USALS or DiSEqC1.2 compatible FTA satellite receiver can control the Free To Air dish motor.

Where Do I install a DiSEqC 2X1 or DiSEqC 4X1 Switch?

Typically, when you use a quad polar LNB like the Invacom QPH031 you want to use a 2X1 or 4X1 DiSEqC switch after the motor. Basically, here is a quick rundown:

  • Run RG6 cable from your receiver to HH motor.

  • Run RG6 cable from HH motor to "Receiver" port on DiSEqC switch.

  • Run RG6 from ports on DiSEqC switch to Linear and Circular ports on the LNB.

Where to install DiSEqC HH Dish Motor Mount:

When you want to install an HH Motor, do a thorough site survey to ensure the proper location to install. First, scratch off the roof unless you have a flat roof and you want to use a non-penetrating roof mount. The best place to install a Free To Air HH Motor is on the ground on a pole. Go to The Home Depot and get a 2" pole. Drive it into the ground about 2 1/2 and make sure to use a pole level to make sure that the pole is 100% level.

Make sure & purchase a SF95 satellite signal finder / meter because it will help you guide your motor to the true south azimuth location.  The meter will go off every time you get a satellite signal, so, when you keep on turning the motor, if the meter keeps going off, you know you have properly aligned the dish to the satellite arc.  If not, you may need to keep adjusting for the proper azimuth.  (Read the installation instruction guide)


The dish motor comes with 2 U-bolts (clamps), elevation bracket, and an excellent users-manual.  If you read the users-manual fully, the installation will be very easy.  It's explained very well.  If you still need help installing dish motor Check out Technical Support Section and see our help section to help you install your dish motor.


Check out these discounted dish motor kits


76cm DSS FSS FTA Dish Kit


76 centimeter 75 centimeter motorized dish kit

FTA Motor Dish Kit #3

Linear & Circular

More info...

30-inch FSS Linear Dish Kit


Linear Ku FTA 76 centimeter dish kit

FTA Motorized Dish Kit #4

Linear Only

More Info...


120cm FSS Linear Dish Kit


120 centimeter fta ku band motorized dish kit

FTA Motorized Dish Kit #5

Linear Only

More Info...


1.2m FTA DSS/FSS Dish Kit


120 centimeter dish kit

FTA Motorized Dish Kit #6

Linear & Circular

More Info...


90cm FTA DSS FSS Dish Kit


FTA dish motor diseqc switch and 90cm free to air dish

FTA Motorized Dish Kit #7

Linear & Circular

More Info...

90cm FSS Linear Dish Kit


90cm 36 inch satellite dish and dish motor diseqc motor and Ku linear standard LNB

FTA Motorized Dish Kit #8

Linear Only

More Info...




www.Galaxy-Marketing.com Satellite Blog & News

↑ Grab this Headline Animator

Spiritcast Satellite Systems

Toll Free:

1-888-333-5560 No tech support available at this number

Local: 770-420-5272
Technical Support 770-420-5462





Technical Support:


We accept Visa, Master Card, American Express, Discover

Terms and Conditions

Hours of


9:00AM - 5:00PM EST Mon-Fri



1200 Cobb Pkwy North

Suite 100B

Marietta, GA 30062 USA

[Home] [Up] [Products] [Channel List] [Satellite List] [What is FTA] [Contact Us] [Information Request] [Our Guarantee]

[Technical Support] [Order Tracking] [Weekly Sale] [Refurbished] [Terms and Conditions] [Repair Services] [Privacy Statement]

Some products may not be exactly as pictured.  Channel lists my change at any time with out notice.  We are not responsible for discontinued stations or programming.  We reserve the right to send replacement products that are in stock on orders placed on our site or by phone.  Copyright 2005 Galaxy Marketing. All rights reserved. Warranty & Return Policy | Privacy Statement | Contact Us |