DiSEqC Switches, Multi-Switches,
22KHz
Switches, Splitters, Diplexers, and More....
Many get DiSEqC switches (pronounced: "Die Sec" switch) and
Multi-switches confused. So, what's the difference between a
DiSEqC switch and
Multi-Switch? It's simple. A
DiSEqC switch
takes signals from many
LNB's and
combine them to be used by a receiver. The DiSEqC protocol is
usually used by
Free To
Air or "standard" satellite receivers. All
Common Interface
(CI) Receivers, most
Common Access (CA)
receivers and and all
Free To
Air (FTA) use DiSEqC protocol.
A Multi-Switch combines signal from many
LNBF's and
distributes them to 3 or more receivers. A
Multi-Switch is usually used with DISH Network or DirecTV systems,
but can be used with Free To Air systems also.
Need to see wiring diagrams? Check out our
wiring & installation diagrams |
|
|
|
|
DMS DS21T2 2X1 DiSEqC
Switch |
|
|
The
DS21T2
DiSEqC switch with weather cover! If
you follow the instructions below, this switch will last
you a long time.
 TIP:
Always unplug your satellite receiver from the outlet
before installing, reinstalling or uninstalling new
DiSEqC switches, Multi-switches or LNBF's.
Hi Quality
1-year Warranty
Need to see more wiring diagrams?
Check out our
wiring & installation diagrams |
|
|
|
|
DMS DS41T2 2X1 DiSEqC
Switch |
|
|
The
DS41T2
DiSEqC switch with weather cover! Exact
same switch as above, but you can hook up to 4 dishes
(LNB's). If you follow the instructions below,
this switch will last you a long time.
TIP:
Always unplug your satellite receiver from the outlet
before installing, reinstalling or uninstalling new
DiSEqC switches, Multi-switches or LNBF's.
Hi Quality
1-year Warranty
Need to see more wiring
diagrams? Check out our
wiring & installation diagrams |
|
|
|
|
3x4 Multi-Dish
Switch |
|
|
|
3X4 Multi-Switch
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-4 |
$19.99 |
|
5-9 |
$17.50 |
|
10-14 |
$15.00 |
|
15-19 |
$12.50 |
|
>19 |
$10.00 |
|
 |
|
This switch allows you to to combine
signal from one satellite and a CATV or OTA feed and
split it insde using diplexers!
|
|
|
|
|
4x4 Multi-Dish
Switch |
|
|
|
4X4 Multi-Switch
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-4 |
$37.99 |
|
5-9 |
$32.00 |
|
10-14 |
$29.00 |
|
15-19 |
$27.00 |
|
>19 |
$25.00 |
|
|
|
This switch allows you to to combine
signal from two satellites and install it on up to 4
satellite receiver. Need to go to 6 receiver?
Buy a 3X4 switch and this 4x3 switch. Then you can
"piggy back" them. see diagram below!
Need to see more wiring diagrams?
Check out our
wiring & installation diagrams
Why use a dual LNB with a
multi-switch? When installing a multi switch 1
port is controlled by 13V & the other by 18V DC (1
for each polarity). In order to receive both
polarizations (H/V or R/L) you must have a source
for each port. One output of the LNBF will
always be on 8V of power and the other will always
on 13V DC.
|
|
|
|
|
3X8 Multi-Switch
|
|
|
|
3X8 Multi-Switch
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-4 |
$29.99 |
|
5-9 |
$27.99 |
|
10-14 |
$25.50 |
|
15-19 |
$23.50 |
|
>19 |
$20.00 |
|
|
|
This switch allows you to to combine
signal from one satellite and install it on up to 8
satellite receiver. Need to go to 10 receiver?
Buy a 3X4 switch and this 3x8 switch. Then you can
"piggy back" them. see diagram below!
Need to see more wiring diagrams?
Check out our
wiring & installation diagrams
Why use a dual LNB with a
multi-switch? When installing a multi switch 1
port is controlled by 13V & the other by 18V DC (1
for each polarity). In order to receive both
polarizations (H/V or R/L) you must have a source
for each port. One output of the LNBF will
always be on 8V of power and the other will always
on 13V DC.
|
|
|
|
|
4X8 Multi-Switch
|
|
|
|
4X8 Multi-Switch
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-4 |
$54.99 |
|
5-9 |
$52.00 |
|
10-14 |
$49.00 |
|
15-19 |
$47.00 |
|
>19 |
$45.00 |
|
|
|
This switch allows you to to combine
signal from two satellites and install it on up to 8
satellite receiver. See diagram below!
4X8 Multi Switch Diagram
Need to see more wiring diagrams?
Check out our
wiring & installation diagrams
Why use a dual LNB with a
multi-switch? When installing a multi switch 1
port is controlled by 13V & the other by 18V DC (1
for each polarity). In order to receive both
polarizations (H/V or R/L) you must have a source
for each port. One output of the LNBF will
always be on 8V of power and the other will always
on 13V DC.
|
|
|
|
|
6X8 Multi-Switch
|
|
|
|
6X8 Multi-Switch
Buy More, Save
More |
|
Qty |
Price/pc |
|
1-4 |
$69.99 |
|
5-9 |
$67.00 |
|
10-14 |
$64.00 |
|
15-19 |
$61.00 |
|
>19 |
$59.00 |
|
|
|
This switch allows you to to combine
signal from two satellites and install it on up to 8
satellite receiver. See diagram below! | | |
