Our satellite
motor is designed to
use DiSEqC 1.2 or USALS commands from your FTA satellite
receiver to move. It consumes the same 13/18V
power used by the LNB to power the motor so it's not
necessary to run additional wires to power the motor.
The motor accounts for the Azimuth, Elevation, and
polarization of your satellite dish. If you want
to be guaranteed superior signal, purchase the motor
with our
90cm dish antenna.
Our motorized Ku
band satellite dish kits include a DiSEqC1.2 HH motor
mount, along with an offset satellite dish, digital Ku
band LNBF, and much more. Go to this section if
you want to get the most out of your FTA satellite
receiver.
We carry 18" (45cm) DirecTV dishes,
30" (75cm) dishes,
36" (90cm) dishes,
1.2m/120cm dishes, and
1.8m/180cm dishes. All of our
dishes, except our
18"
dish have a 40mm
LNB
holder and works with all the linear LNB's we sell.
Our special LNB bracket works with any dish on the
market and can be chained to each other to pick up
signals from multiple satellites.
We also carry a
variety of custom made packages. Our packages are
numbered and include satellite motors, satellite Ku
LNB's, Antenna and Satellite Tripods, Signal Level
Meters, and Much More.... Click
We carry a vast
variety of equipment to help you with the installation
of your satellite system. We carry the
SF-95 signal finder,
self installation kit,
compass and
clinometer combo, water seals, professional signal
meters and more...
These are
satellite bundles. We have put together six
packages including
motorized dish package,
multiple satellite package and more. Go to this
section for great prices and unique packages. If
you have satellite receiver, put it to use.
We carry 2x1 and
4x1 DiSEqC switches,
DiSEqC switches with weather covers, multi-switches,
3X4
switch,
4X4 switch,
3X8 switch,
6X8 switch,
4X8 switch,
diplexers in-line amps, surge protectors, and 22KHz
switches.
Supplied By:

If you did not buy from us, you paid too much!
