The LEXIUM DBS7000 is the ideal satellite receiver to be
used with SES1 or Galaxy 19 or any other C or Ku band
satellite to receive Free To Air FTA
channels
With super high speed blind scan and HDMI output for
outstanding picture clarity, the LEXIUM DBS7000 is the
most dependable and user friendly satellite receiver to
be used for free international TV stations broadcasting
via satellite.
Excellent choice for the free Persian, Arabic,
Thai, Vietnamese, Kurdish, Armenian, & Turkish stations
on Galaxy 19 ( Galaxy 25 / Telstar 5 ).
If you want a good reliable satellite receiver that you
won't have to replace once every year, or once every few
months, then this is your choice! Try the LEXIUM
today! This satellite receiver is FCC certified.
Costs a little bit more, but you get more with it.
Excellent & crisp picture quality, powerful blind scan,
and much more....
Receiver Includes:
RCA
& HDMI Cables
2pcs
AAA Batteries
User's
Manual
Remote
Control
2-Year
Manufacturers Warranty
Excellent satellite receiver for all the following stations:
The following
satellites have already been pre-programmed inside the
LEXIUM DBS7000 Satellite Receiver. This includes all
up to date transponder frequencies, symbol rates,
polarities, and forward error correction (FEC)
OK In normal mode: invokes current channel list In a
menu: confirms menu item
10
CH▼ Switches to the next lower channel
location/cursor moves down
11
FAV Invokes own favorites list
12
RECALL Switches to previously selected channel
13
PAUSE Stills the frame
14
INFO Displays reception data of the current channel
(satellite-finder function)
15
0–9 Selects channel directly, numerical input
16
P– In normal mode: changes channel group In TV
channel list: Ten-key block commutation
17
P+ In normal mode: changes channel group In TV
channel list: Ten-key block commutation
18
V– Decreases volume/cursor moves to the left
19
CH▲ Switches to the next higher channel
location/cursor moves up
20
MENU Invokes main menu
21
EXIT Exits menu or menu item
22
AUDIO Changes audio mode
23
EPG Invokes Electronic Program Guide (if offered by
the broadcasting station)
24
TV/SAT Switches between terrestrial and satellite
antenna
25
TV/RADIO Switches between TV and radio mode
How to switch
the output setting on your receiver from PAL to NTSC or NTSC
to PAL:
1. Either
unplug the receiver from the power outlet, then plug it back
in, or using the On/Off switch on the back panel of your
DBS7000 receiver, turn the power off, then turn it back on.
2. Press
"MENU"
3. Press
"CH▲" 2 times
4. Press the
center "OK" button
5. Press
"CH▼" 1 time
6. Press the
center "OK" button
7. Press "V-"
and continue to press it until your picture stops scrolling
or you have successfully changed the setting from PAL to
NTSC or from NTSC to PAL8. Press
"EXIT" and save the settings.
Is your
picture scrolling? Follow the steps above to change
the setting on your LEXIUM DBS7000 from PAL to NTSC or from
NTSC to PAL.
View
Cart
